| Network Scanning: | Not Support Network |
|---|---|
| Type: | Qr Reader |
| Interface Type: | USB |
| Scan Speed: | 120 Scan/Sec |
| Scan Element Type: | CMOS |
| Application: | Access Control, Kiosk, Vending Machines |
| Samples: |
|---|
Suppliers with verified business licenses
| Acquisition Performance | |||||
| Model | N660 | N670 | |||
| Sensor | 640*480 Pixels | 1280*800 Pixels | |||
| Acquisition Speed | 1/120fps | 1/60fps | |||
| FOV | Diagonal 52°,Level42°,Vertical 32° | Diagonal 48.7°,Level 42°,Vertical 27° | |||
| Reading Performance | |||||
| Precision | 2D≥5mil,1D≥4mil | ||||
| Depth of Field | Testing Code | N660 Depth of Field | N670 Depth of Field | ||
| 4mil Code 39 | 40~120mm | 60~160mm | |||
| 5mil Code 128 | 30~170mm | 40~230mm | |||
| 5mil Code 39 | 30~160mm | 45~200mm | |||
| 20mil Code 39 | 60~320mm | 70~420mm | |||
| 100% UPCA | 40~290mm | 55~310mm | |||
| 5mil PDF417 | 30~120mm | 40~220mm | |||
| 10mi Data Matrix l | 20-100mm | 35-210mm | |||
| 20mil QR Code | 30~210mm | 35~340mm | |||
| Scan Angle | Roll 360°,Pitch ± 55°,Screw ± 55° | ||||
| Symbologies | 2D Code: QR,Data Matrix,PDF417,Hanxin code,Dotcode etc | ||||
| 1D Code: UPC-A, UPC-E, EAN-8, EAN-13, ISBN, Code 128, GS1 128, ISBT 128, Code 39, Code93,Code 11, Interleaved 2 of 5, Industrial 2 of 5,Matrix 25, Standard 25, Codabar, MSI/MSI PLESSEY, GS1 DataBar etc | |||||
| OCR-A,OCR-B Code(*Customization Version) | |||||
| Minimal Print Contrast | 20% | ||||
| Illumination LED | |||||
| Illumination | White | ||||
| Laser Aiming | |||||
| Aiming | Laser diode 650nm | ||||
| Physical Parameter | |||||
| Dimension | (W×D×H):23.5mm×16.2mm×6.8mm | ||||
| Weight | 3g | ||||
| Interface | |||||
| Interface | UART,USB | ||||
| Cable | Flexible Flat Cable (FFC) | ||||
| Scan Mode | Trigger Mode/Command Mode/Sense Mode | ||||
| Install Hole | Two M1.2mm threaded screw holes with depth 3.2mm; Recommend to use PB1.4mm Flat tail self-tapping screws,lock depth no more than 3mm |
||||
| Environmental Data | |||||
| Operating Temperature | -30ºC ~ 70ºC | ||||
| Storage Temperature | -40ºC ~ 80ºC | ||||
| Humidity | 5% ~ 95%(no-condensing) | ||||
| Ambient Light | Max.100,000 Lux | ||||
| Electrical Parameter | |||||
| Input Voltage | 3.3V±0.3V | ||||
| Current@3.3VDC Operating | N660:<190mA | N670:<230mA | |||
| Current@3.3VDC Standby |
<1mA | ||||
| Certifications | |||||
| Certificates | CE,RoHs, FDA | ||||
| Warranty | |||||
| NO | PIN | Signal Type | Description |
| 1 | NC | Empty PIN | |
| 2 | VDD | Power | 3.3V Power Supply |
| 3 | GND | Power | GND |
| 4 | RX | Input | UART Receive,TTL Level |
| 5 | TX | Output | UART Send,TTL Level |
| 6 | D- | Bi-directional Difference | USB D- Signal |
| 7 | D+ | Bi-directional Difference | USB D+ Signal |
| 8 | NC | Empty PIN | |
| 9 | BUZ | Output | Beeper Signal Outputs (High Level is Valid), Need External Drive |
| 10 | LED | Output | LED Signal Outputs (High Level is Valid), Need External Drive |
| 11 | NC | Empty PIN | |
| 12 | nTRIG | Input | Trigger Signal Inputs, Low Level is Valid |
Suppliers with verified business licenses
){kind=link}
){kind=link}